How do I build a wall into an old doorway? - how do floor wipers work
Okay, so here's the deal - I have a back door to the kitchen, and I want to seal it from leading to another room because I do not the space to be suspended.
How to build a wall - What are the steps? Am I obligated to the old door first or destroy what? How can I do?
Tuesday, December 8, 2009
How Do Floor Wipers Work How Do I Build A Wall Into An Old Doorway?
Subscribe to:
Post Comments (Atom)
3 comments:
Unscrew the door and cry.
Take the door and frame with painting sheet rock mud 2by4 First
Remove the door and door frame
Plan and mark the location of the inner wall. To do this, on the ground and at the opening.
Mark and cut two 2 by 4 pieces of wood in the upper and lower walls. The length is equal to the width of the wall.
Placement of the two plates 2 of 4 side by side so that any mark 16 inches for the placement of pins on the wall.
Put the wall on a flat surface, such as soil. Place the nails on the edge between the top and bottom-2, 4, also on the board. It is easier to spike nail a top or bottom 2 of 4 at a time. Make sure to keep rechecking the alignment of the panels 2 by 4 after each nailing.
Lift the frame wall to the other. Place the bottom side, where it is necessary, and an elevator. Press up and down with a hammer or a hammer until it is positioned correctly. Check with a level.
Checkpoints along the ceiling and the top of the opening is not. Fill the gaps with wedges. The hotel is located in the wall to the EC --iling and soil nails.
Nail in drywall, insulation, plaster or wood panels in place. The choice depends on the use of the wall and the goal you wish to search.
Post a Comment